Muhammad Khusairy Bin Bakri

Postdoctoral Research Associate | CMEC

PACCAR 140
m.khusairybinbakri@wsu.edu
Curriculum Vitae

Research Interests

  • Mechanical and chemical characterization of bio-composites
  • Bio-concrete and biomaterials
  • Cellulose and natural fiber
  • Waste materials and recycled materials
  • Wastewater and desalination
Google Scholar Profile
Researchgate Profile

Professional Experience

  • Postdoctoral Research Associate | Composite Materials and Engineering Center, Washington State University, 2022 – Present
  • Research Fellow | Faculty of Engineering (Feng), Universiti Malaysia Sarawak (UNIMAS), 2019-2021
  • Higher Degree Researcher | Faculty of Engineering, Computing, and Science (FECS), Swinburne University of Technology Sarawak Campus, 2014-2018
  • Trainee Piping/Mechanical Engineer | Piping/Mechanical Department, Ranhill WorleyParsons (Miri) Sdn. Bhd., 2012-2012

Education

  • PhD. | Swinburne University of Technology Campus, (Hawthorn/Sarawak), Australia/Malaysia, 2018
  • M.Eng. | Swinburne University of Technology Sarawak, Malaysia, 2016
  • B.Eng. | Mechanical Engineering, Swinburne University of Technology Sarawak, Malaysia, 2014

Awards

  • Finalist for Swinburne’s 2022 Alumni Impact Awards for the Innovative Planet Impact Award.
  • Top Downloaded Article 2019-2020 – The paper has been recognized as the top 10 most downloaded papers in the Journal of Vinyl and Additive Technology by Wiley Publishing Company
  • Top Downloaded Article 2018-2019 – The paper has been recognized as a top 10% most downloaded paper in the Journal of Vinyl and Additive Technology by Wiley Publishing Company
  • Top Downloaded Article 2017-2018 – The paper has been recognized as the top 20 most read papers in the Journal of Vinyl and Additive Technology by Wiley Publishing Company
  • Innovation Technology Expo (InTEX2018) 17th -18th July 2018 Pullman Hotel and UNIMAS, Sarawak, Malaysia– Gold, Silver, and Bronze Medalist
  • Innovation Technology Expo (InTEX2017) 17th -18th May 2017 DeTAR PUTRA UNIMAS, Sarawak, Malaysia– Gold and Bronze Medalist

Books

  • Rahman, M.R., Chin, M.Y., and Bakri, M.K.B. (2022) Waste Materials in Advanced Sustainable Concrete – Reuse, Recovery, and Recycle. Chapter 1 -10, Springer, Cham, pp. 1-186.
  • Rahman, M.R., and Bakri, M.K.B. (2022) Recycled Plastic Biocomposites. Chapter 1 -14, Woodhead Publishing, Elsevier, Sawston, pp. 1-330

Publications

  • Khui, P.L.N., Rahman, M.R., Abdul Halim Yun, H.B., Huda, D., Hamdan, S., Bakri, M.K.B., Matin, M.M., Kuok, K.K., Chin, M.Y., Al-Bogami, A.S., Alamry, K.A., and Rahman, M.M. (2022) Characterization and Optimization of Organoclay-Poly(Melamine-Co-Formaldehyde)-Methylated Solution Impregnated Pulai (Alstonia spp.) Wood Using Response Surface Methodology. BioResources 17(2), 2780-2809. DOI: 10.15376/biores.17.2.2780-2809
  • Kamran, M.J., Jayamani, E., Soon, K.H., Yat, C.W., Rahman, M.R., Al-Bogami, A.S., Huda, D., Bakri, M.K.B., and Rahman, M.M. (2022) Characterization and Comparative Study on Chemically Treated Luffa Fiber as Reinforcement for Polylactic Acid Bio-composites. BioResources 17(2), 2576-2597. DOI: 10.15376/biores.17.2.2576-2597. 
  • Taib, N.A.A.B., Rahman, M.R., Huda, D., Kuok, K.K., Handan, S. Bakri, M.K.B., Julaihi, M.R.M.B., and Khan, A. (2022) Polymer Bulletin 1(1), 1-35. DOI: 10.1007/s00289-022-04160-y 
  • Chin, M.Y., Bakri, M.K.B., Rahman, M.R., Kuok, K.K., Khui, PLN., and Huda, D. (2022) Effect of Chemical Treatment on Silicon Manganese: Its Morphological, Elemental and Spectral Properties and Its Usage in Concrete. Silicon 1(1), 1-17. DOI: 10.1007/s12633-021-01569-4  
  • Chin, M.Y., Rahman, M.R., Kuok, K.K., Chiew, W.Y., and Bakri, M.K.B. (2021) Characterization and Impact of Curing Duration on the Compressive Strength of Coconut Shell Coarse Aggregate in Concrete. BioResources 16(3), 6057-6073. DOI: 10.15376/biores.16.3.6057-6073. 
  • Hari Prashant, P.V.S., Jayamani, E., Soon, K.H., Rahman, M.R., and Bakri, M.K.B. (2021) Characterization Study of Flax/Strontium Titanate/Polypropylene Composite for Low‐K Dielectric Applications. Journal of Applied Polymer Science 138(24), 50577. DOI: 10.1002/app.50577 
  • Khui, P.L.N., Rahman, M.R., and Bakri, M.K.B. (2021) A Review on the Extraction of Cellulose and Nanocellulose as a Filler Through Solid Waste Management. Journal of Thermoplastic Composite Materials. 1(1), 1-22. DOI: 10.1177/08927057211020800 
  • Hari Prashanth, P.V.S., Jayamani, E., Soon, K.H., Yat, C.W., Rahman, M.R., and Bakri, M.K.B. (2021) Interfacial Polarization Effects on Dielectric Properties in Flax Reinforced Polypropylene/Strontium Titanate Composites. Materials Chemistry and Physics, 265(1), 124489. DOI: 10.1016/j.matchemphys.2021.124489 
  • Mohd Khairulzaim, A.A.B., Rahman, M.R., Roslan, L., Bakri, M.K.B., Khan, A., and Matin, M.M. (2021) Analysis of Char Prepared by Pyrolysis of Dabai (Canarium odontophyllum) Nutshells as a Potential Precursor of Biocarbon Used for Wastewater Treatment. BioResources 6(3), 5036-5046. DOI: 10.15376/biores.16.3.5036-5046 
  • Khui, P.L.N., Rahman, M.R., Kuok, K.K., Bakri, M.K.B., Adamu, M., Tazeddinova, D., Kazhmukanbetkyzy, Z.A., and Torebek, B. (2021) Small-size Jatropha Seed Biochar Extracted from Microwave Pyrolysis: Optimization of Its Biocomposites Mechanical Properties by Mixture Design. BIoResources 16(3), 4716-4730. DOI: 10.15376/biores.16.3.4176-4730 
  • Rahman, M.R., Adamu, M., Hamdan, S., Bakri, M.K.B., Md. Yusof, F.A.B., and Khan. A. (2021) Optimization and Characterization of Acrylonitrile/MAPE/Nano-clay Bamboo Nanocomposites by Response Surface Methodology. Polymer Bulletin 1(1), 1-29. DOI: 10.1007/s00289-021-03628-7 
  • Khui, P.L.N., Rahman, M.R., Ahmed, A.A., Kuok, K.K., Bakri, M.K.B., Tazeddinova, D., Kazhmukanbetkyzy, Z.A., and Torebek, B.B. (2021) Morphological and Thermal Properties of Composites Prepared with Poly (lactic acid), Poly (ethylene-alt-maleic anhydride), and Biochar from Microwave-pyrolyzed Jatropha Seeds. BioResources 16(2), 3171-3185. DOI: 10.15376/biores.16.2.3171-3185 
  • Adamu, M., Rahman, M.R., Bakri, M.K.B., Md Yusof, F.A.B., and Khan, A. (2021) Characterization and Optimization of Mechanical Properties of Bamboo/Nanoclay/Polyvinyl Alcohol/Styrene Nanocomposites using Response Surface Methodology. Journal of Vinyl and Additive Technology 27(1), 147-160. DOI: 10.1002/vnl.21792