Equipment & Services
Available Services
- Project development
- Codes and standards guidance
- Modeling
- Built Environment analysis
- Reporting
- Pelletization
- Custom compounding
- Product development trials
- Recycling
- Extrusion
- Wood composite manufacturing
- OSB, MDF, plywood, CLT production
- Accelerated weather testing (UV and moisture)
- Thermal aging
- Submersion testing
- Physical property testing
- Microscopy
- Spectroscopy
- Performance Testing
- Shear wall testing
- Pull-out testing
- ICC Accredited testing
- Wood and biomass size reduction
- Milling
- Shredding
Partial list of equipment & capabilities:
Materials and Structural Testing
- Servo-hydraulic actuators with 10, 22, 56, 100, and 220 kip capacities
- Servo-hydraulic axial test frames with 22 and 55 kip capacities with computer control and data acquisition
- 200 kip tension-testing machine
- 500 kip reaction floor with two 7.5-ton overhead cranes
- 120 constant-load test frames (for time-dependent behavior)
- 2 accelerated weathering chambers: Xenon arc and fluorescent UV with water spray
- 5 controlled environment conditioning rooms (15’ x 23’)
- 1 controlled environment conditioning chamber (64 c.f.) -50F to 300F temperature range 20% to 95% relative humidity range. Programmable cyclic controls.
- 2, 20, 25 and 30 kip electromechanical universal test machines with computer control and data acquisition (smaller load cells available)
- Dynisco Basic Pendulum Impact Tester
- Variable Incidence Tribometer
Composite Manufacturing
- Complete wood-plastic composite extrusion line with industry production rate capabilities
- 35mm, 55mm, and 86mm conical twin screw extruders
- 25mm single screw extruder
- 18mm parallel twin screw extruder
- Pellet mill
- Multilayer film coextrusion line
- Pultrusion system
- 3 profile cooling units
- 50-ton injection molding machine
- HPL/LPL resin impregnator and development system
- Computer-controlled hydraulic presses with oil-heated platens (4 by 8 ft., 3 by 3 ft.)
- Celcum Extrudate Swell and Temperature Monitoring System with visible light micrometer and pyrometer temperature monitor
- Fiber wet spinning line
Spectroscopic and Microscopic Analysis
- Atomic force microscope (Veeco Multimode Picoforce) with high temperature and solution imaging kits
- RMC cryo ultra microtome equipped with diamond knife
- FTIR spectroscopy with mid- and near-IR capability
- FTIR microscope and ATR
- Viscotek Complete Tetra Detector Platform and GPCmaxTM front-end chromatography setup
- Transmission light microscopes with cross polarizers and heating and freezing stage
- Stereoscope with color ccd camera and image analysis
- High resolution monochrome digital camera
Thermal, Rheological and Molecular Weight Analysis
- Simultaneous differential scanning calorimeter and thermal gravimetric analyzer with attached FTIR gas stream analysis
- Dynamic mechanical analyzer
- Submersion dynamic mechanical analyzer
- Differential scanning calorimeter with temperature modulation
- Dynamic contact angle analyzer
- Parallel plate rheometer
- Capillary rheometer
- Torque rheometer
Sorting, Drying, Blending, and Forming
- Strand, particle and fiber dryers
- Mechanical and aerodynamic particle sorters
- Large-scale ribbon blender with load-scaled receiver tank
- Drum blender w/ air atomized resin sprayer
- Adhesive roll coater
- Electrostatic and mechanical formers
- Steam tube dryer w/ bag dump station and auger feed system
- Rotary dryer
Nondestructive Evaluation
- Ultrasonic pulser-receiver
- Piezoelectric transducers
- Transverse vibration E-computer
- Stress wave timers
- Ground penetrating radar
- Infrared thermal imaging system
- X-ray vertical density profiler
Building Envelope Evaluation
- Hygrothermal research
- Natural exposure testing
- Energy performance assessment
Furnish Generation
- chipper; hammermill
- ring, drum and disc flakers
- dual disc refiner (with steam conditioner)