Pelaez-Samaniego, M.R., V. Yadama, M. Garcia-Perez, E. Lowell, R. Zhu, and K. Englund. 2016. Interrelationship between lignin-rich dichloromethane extracts of hot water-treated wood fibers and high-density polyethylene (HDPE) in wood […]
Ma, R., M. Guo, K.T. Lin, V.R. Hebert, J. Zhang, M.P. Wolcott, M. Quintero, K.K Ramasamy, X. Chen, and X. Zhang. 2016. Peracetic acid depolymerization of biorefinery lignin for production […]
Guo, X., J. Xin, M.P. Wolcott and J. Zhang. 2016. Mechanochemical oleation of lignin through ball milling and properties of its blends with PLA. Chemistry Select. DOI: 10.1002/slct.201600633. 1(13):3449-3454.
Xin, J., M. Li, R. Li, M.P. Wolcott, and J. Zhang. 2016. Green epoxy resin system based on lignin and tung oil and its application in epoxy asphalt. ACS Sustainable […]
Xin, J., P. Zhang, K. Huang and J. Zhang. 2014. Developing Vegetable Oil-Based High Performance Thermosetting Resins. In Soy-Based Chemicals and Materials, Chapter 13, ACS Symposium Series, Vol 1178; American Chemical Society: […]
Brito, G.F., J. Xin, P. Zhang, T.J.A. Mélo and J. Zhang. 2014. Enhanced melt free radical grafting efficiency of polyethylene using a novel redox initiation method. RSC Advances, 4(5):26425-26433.
Xin, J., P. Zhang, K. Huang and J. Zhang. 2014. Study of green epoxy resins derived from renewable cinnamic acid and dipentene: synthesis, curing and properties. RSC Advances, 4:8525-8532.
Chen, F. and M.P. Wolcott. 2015. Polyethylene/paraffin binary composites for phase change material energy storage in building: A morphology, thermal properties, and paraffin leakage study. Solar Energy Materials and Solar […]
Chen, F. and M.P. Wolcott. 2014. Miscibility studies of paraffin/polyethylene blends as form-stable phase change materials. European Polymer Journal. DOI: http://dx.doi.org/10.1016/j.eurpolymj.2013.09.027. 52:44-52.
Ou, R., Q. Wang, M.P. Wolcott, S. Sui, and Y. Xie. 2014. Rheological behavior and mechanical properties of wood flour/high density polyethylene blends: Effects of esterification of wood with citric […]
Ou, R., Q. Wang, M.P. Wolcott, S. Sui, Y. Xie and Y. Song. 2014. Effects of chemical modification of wood flour on the rheological properties of high-density polyethylene blends. Journal […]
Ou, R., Y. Xie, Q. Wang, S. Sui and M.P. Wolcott. 2014. Effects of ionic liquid on the rheological properties of wood flour/high density polyethylene composites. Composites: Part A. DOI: […]
Ou, R., Y. Xie, M.P. Wolcott, S. Sui, and Q. Wang. 2014. Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: Effect of removal of wood cell […]
Ou, R., Y. Xie, M.P. Wolcott, F. Yuan, and Q. Wang. 2014. Effect of wood cell wall composition on the rheological properties of wood particle/high density polyethylene composites. Composites Science […]
Ou, R., Y. Xie, Q. Wang, S. Sui, and M.P. Wolcott. 2014. Thermal, crystallization, and dynamic rheological behavior of wood particle/HDPE composites: Effect of removal of wood cell wall composition. […]
Ten, E., L. Jiang, and M.P Wolcott. 2013. Preparation and properties of aligned poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites. Carbohydrate Polymers. DOI: http://dx.doi.org/10.1016/j.carbpol.2012.09.033. 92(1):206-213.
Huang, K., Z. Liu, J. Zhang, S. Li, M. Li, X. Xia and Y. Zhou. 2014. Epoxy monomers derived from tung oil fatty acids and its regulable thermosets cured in two synergistic ways. BioMacromolecules, 15:837–843.
Zhang, P., J. Xin and J. Zhang. 2014. Effects of catalyst type and reaction parameters on one-step acrylation of soybean oil. ACS Sustainable Chemistry & Engineering, DOI: 10.1021/sc400206t. 2(2):181–187.
Deng, S., J. Cheng, X. Guo, L. Jiang and J. Zhang. 2014. Fiber spinning of polyacrylonitrile grafted soy protein in an ionic liquid/DMSO mixture solvent. Journal of Polymer and the Environment, […]
Huang, K., P. Zhang, J. Zhang, S. Li, J. Xia and Y. Zhou. 2013. Preparation of biobased epoxies using tung oil fatty acid-derived C21 diacid and C22 triacid and study of properties. Green Chemistry, 15:2466–2475.
Huang, K., J. Zhang, M. Li, J. Xia and Y. Zhou. 2013. Exploration of the complementary properties of biobased epoxies derived from rosin diacid and dimerized fatty acid for balanced […]
Liu, H., X. Guo, W. Song and J. Zhang. 2013. Effects of Metal Ion Type on Ionomer-Assisted Reactive PLA Toughening. Industrial & Engineering Chemistry Research, 52:4787–4793.
Zhang, P. and J. Zhang. 2013. One-step acrylation of soybean oil (SO) for the preparation of SO-based macromonomers. Green Chemistry, 5:641-645.
Liu, B , G.Z. Guevara, J. Zhang and L. Liu. 2013. Performance enhancement of poly(lactic acid)/soy protein concentrate blends by promoting formation of network structure. Green Materials, 1:176-185.
Fu, Y., J. Zhang, H. Liu, W.C. Hiscox and Y. Gu. 2013. Ionic liquid-assisted exfoliation of graphite oxide for simultaneous reduction and functionalization to graphenes with improved properties. Journal of Material […]
Zhu, R., H. Liu and J. Zhang. 2012. Effects of functionality and concentration of maleated poly(lactic acid) (PLA) on morphology and properties of PLA/soy protein composites. Industrial & Engineering Chemistry […]
Liu, B., L. Jiang and J. Zhang. 2011. Extrusion foaming of poly (lactic acid)/soy protein concentrate blends. Macromolecular Materials & Engineering, 296:835-842.
Gao, Q., S.Q. Shi, S. Zhang, J. Li, X. Wang, W. Ding, K. Linag and J. Wang. 2012. Soybean meal-based adhesive enhanced by MUF resin. J Appl Polym Sci, 125:3676–81.
Pelaez-Samaniego, R., V. Yadama, M. Garcia-Perez, E. Lowell, R. Zhu, and K.R. Englund. 2015. Interrelationship between lignin-rich hot water extracts of wood fiber and thermoplastic resin. Holzforschung (DOI: 10.1515/hf-2014-0309).
Xin, J., P. Zhang, M.P. Wolcott, X. Zhang, and J. Zhang. 2014. Partial depolymerization of enzymolysis lignin via mild hydrogenolysis over Raney Nickel. Bioresource Technology. DOI: http://dx.doi.org/10.1016/j.biortech.2013.12.092. 155:422-426
Yang, H.S., P. Qiao, and M.P Wolcott. 2010. Fatigue characterization and reliability analysis of wood flour filled polypropylene composites. Polymer Composites. 31(4):553-560.
Yang, H.S., P. Qiao, and M.P Wolcott. 2010. Flexural fatigue and reliability analysis of wood flour/high-density polyethylene composites. Journal of Reinforced Plastics and Composites. 29(9):1295-1310.
Wood, W., B. Li and W.H. Zhong. 2010. Influence of Phase Morphology on the Sliding Wear of Polyethylene Blends Filled with Carbon Nanofibers. Polymer Engineering and Science. DOI 10.1002/pen.21549, 50:613-623.
Wang, Y., V. Yadama, M.P. Laborie and D. Bhattacharyya. 2010. Cure kinetics of PF/PVAc hybrid adhesive for manufacturing profiled wood-strand composites. Holzforschung. 64(5):603-608.
Wang, J.W., M.P.G. Laborie, and M.P. Wolcott. 2011. Correlation of mechanical and chemical cure development for phenol-formaldehyde resin bonded wood joints. Thermochimica Acta. 513(1-2):20-25.
Ten, E., J. Turtle, D. Bahr, L. Jiang, and M. Wolcott. 2010. Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites. Polymer. 51(12):2652-2660.
Ten, E., D.F. Bahr, B. Li, L. Jiang, and M.P. Wolcott. 2012. Effects of cellulose nanowhiskers on mechanical, dielectric, and rheological properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites. Industrial & Engineering Chemistry […]
Ten, E., L. Jiang, and M.P. Wolcott. 2012. Crystallization kinetics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites. Carbohydrate Polymers. DOI: http://dx.doi.org/10.1016/j.carbpol.2012.05.076. 90(1):541-550.
Sun, L.L., B. Li, Y. Zhao and W.H. Zhong. 2010. Suppression of AC Conductivity by Crystalline Transformation in Poly(vinylidene fluoride)/Carbon Nanofiber Composites. Polymer. doi:10.1016/j.polymer.2010.05.007, 51:3230-3237.
Song, W., H. Liu, F. Chen, and J. Zhang. 2013. Effects of ionomer characteristics on reactions and properties of poly(lactic acid) ternary blends prepared by reactive blending. Polymer. 53:2476–2484.
Sahaf, A., K.R. Englund, and M.P. Laborie. 2011. Tack and shear strength of hybrid adhesive systems made of phenol formaldehyde, dextrin and fish glue, and acrylic pressure-sensitive adhesive. Holzforschung 66(1):73-78.
Sahaf, A., M.P. Laborie, K.R. Englund, M. Garcia-Perez, and A.G. McDonald. 2013. Rheological properties and tunable thermoplasticity of phenolic rich fraction of pyrolysis bio-oil. Biomacromolecules 14(4):1132-1139.
Qin, J., H. Liu, P. Zhang, M.P. Wolcott and J. Zhang. 2014. Use of eugenol and rosin as feedstocks for biobased epoxy resins and study of curing and performance properties. […]
Qin, J., M. Wolcott and J. Zhang. 2014. Use of polycarboxylic acid derived from partially depolymerized lignin as a curing agent for epoxy application. ACS Sustainable Chemistry & Engineering. DOI: […]
Migneault, S., A. Koubaa, F. Erchiqui, A. Chaala, K. Englund, C. Krause, and M. Wolcott. 2008. Effect of Fiber Length on Processing and Properties of Extruded Wood-Fiber/ HDPE Composites. Journal […]
Liu, X.Q. and J.W. Zhang. 2010. High performance biobased epoxy derived from rosin. Polymer International. 59:607–609.
Liu, B., L. Jiang, H.Z. Liu, L.L. Sun and J.W. Zhang. 2010. Different Effects of Water and Glycerol on Morphology and Properties of Poly(lactic acid)/Soy Protein Concentrate Blends. Macromolecular Materials […]
Liu, X., Y. Wang, Y. Cao, V. Yadama, M. Xian and J. Zhang. 2011. Study of dextrin-derived curing agent for waterborne epoxy adhesive. Carbohydrate Polymers. 83(3):1180-1184.
Liu, B., J. Zhang, L. Liu, and A.T. Hotchkiss. 2011. Preparation and properties of water and glycerol-plasticized sugar beet pulp materials. Journal of Polymer and the Environment. 19, 559–567.
Liu, H., L. Guo, X. Guo, and J. Zhang. 2012. Effects of reactive blending temperature on impact toughness of poly(lactic acid) ternary blends. Polymer. 53:272–276.
Kumar, S., L.L. Sun, S. Caceres, B. Li, W. Wood, A. Perugini, R.G. Maguire and W.H. Zhong. 2010. The Dynamic Synergy of Graphitic Nanoplatelets and Multi-walled Carbon Nanotubes in Polyetherimide […]
Kazemi-Najafi, S. and K.R. Englund. 2013. Effect of highly degraded high density polyethylene (HDPE) on processing and mechanical properties of wood flour-HDPE composites. J Applied Poly. Sci. 129(6):3404-3410.
Englund, K.R. and V. Villechevrolle. 2010. Flexure and water sorption properties of wood thermoplastic composites (WPCs) made with polymer blends. J. Appl. Polym. Sci. 120(2):1034-1039.
Chowdhury, S. and V. Yadama. 2011. Reactive maleic anhydride polyolefins (MAPOs) in oriented strand board. Part 2: Influence on physical and mechanical properties. Holzforschung, 65(1):89-96.
Chowdhury, S., V. Yadama and M.P. Laborie. 2011. Reactive maleic anhydride polyolefins (MAPOs) in oriented strand board. Part 1. Dynamic themomechanical properties of phenol formaldehyde resins blended with two MAPOs. […]
Chen, F. and J.W. Zhang. 2010. In-situ poly(butylene adipate-co-terephthalate)/soy protein concentrate composites: Effects of compatibilization and composition on properties. Polymer. 51(8):1812-1819.
Anderson, S., J. Zhang and M.P. Wolcott. 2013. Effect of interfacial modifiers on mechanical and physical properties of the PHB composite with high wood flour content. Journal of Polymers and […]